Sumiglass Metallic Film Series Properties (SGCC Certified Laminated Glass)
| Description | Design Code |
Pattern Size |
Pattern Surface Coverage | Max. Size | Solar Trans. (%) |
Visible Light Trans. (%) |
U-Factor BTU/hr-ft-F |
SC | SHGC |
|---|---|---|---|---|---|---|---|---|---|
| Diamond Deck Plate | - | - | - | 50 x 108 | 16 | 20 | - | .15 | |
| Galvanized | - | - | - | 50 x 108 | - | ||||
| Brushed Rays | - | - | - | 50 x 108 | - | ||||
| Wave | - | - | - | 50 x 108 | 25 | 34 | - | .25 | |
| Machine Circles | - | - | - | 50 x 108 | 18 | 25 | - | .15 | |
| Linen | - | - | - | 50 x 108 | 22 | 30 | - | .20 |
PLEASE NOTE:
This information is to help you and your customers understand the difference among various types of glazing, so the right choice is made for the specific application. Arch Deco Glass® assumes no responsibility for it's use. The above data was accumulated and calculated at Arch Deco Glass® utilizing the following
methods and meters with a +/- 3% tolerance.
SOLAR HEAT GAIN
a. EDTM model number SP2065 Digital Solar Meter Power/Transmission.
b. Calculated at 20 BTU/HR*FT
c. Light Source = 20 BTU/HR FT
UV BLOCK
a. EDTM model number UV1365E UV Transmission & Power Meter.
b. Calculated as the percent blocked.
c. Calibration source 370 nm ultra violet.
VISIBLE LIGHT
a. EDTM model number VP 1165 Visible Light Transmission & Power Meter.
b. Calculated as the percent of visible light passing through the glass.
c. Calibrated at 100% Light Source.
SOLAR TRANSMISSION
a. EDTM model number SP2065 Digital Solar Meter Power/Transmission.
b. Calculated as the percent of Solar Transmission.
c. Calibrated 100% Infrared Lamp.
SHADING COEFFICIENT
Shading Coefficient of any glass is defined as the ratio of the Solar Heat Gain of the glass to the Solar Heat Gain of 1/8" (3.0mm).
