Sumiglass Fiber Tone Series Properties

Description Design
Code
Pattern
Size
Pattern Surface Coverage Max. Size Solar
Trans. (%)
Visible Light
Trans. (%)
U-Factor
BTU/hr-ft-F
SC SHGC
White FT100 - - 63 x 108 25 53 - .29 0.25
Light Tan FT101 - - 63 x 108 24 43 - .29 0.25
Tan FT102 - - 63  108 27 43 - .29 0.25
Light Grey FT103 - - 63 x 108 24 33 - .23 0.20
Medium Grey FT104 - - 63 x 108 13 15 - .17 0.15
Yellow FT116 - - 63 x 108 25 37 - .29 0.25
Red FT122 - - 63 x 108 29 29 - .29 0.25
Medium Blue FT155 - - 63 x 108 22 14 - .23 0.20
Electric Blue FT166 - - 63 x 108 22 8 - .23 0.20
Original Fiber FT200 - - 63 x 108 42 53 - .46 0.40

PLEASE NOTE:
This information is to help you and your customers understand the difference among various types of glazing, so the right choice is made for the specific application. Arch Deco Glass® assumes no responsibility for it's use. The above data was accumulated and calculated at Arch Deco Glass® utilizing the following
methods and meters with a +/- 3% tolerance.

SOLAR HEAT GAIN
a. EDTM model number SP2065 Digital Solar Meter Power/Transmission.
b. Calculated at 20 BTU/HR*FT
c. Light Source = 20 BTU/HR FT

UV BLOCK
a. EDTM model number UV1365E UV Transmission & Power Meter.
b. Calculated as the percent blocked.
c. Calibration source 370 nm ultra violet.

VISIBLE LIGHT
a. EDTM model number VP 1165 Visible Light Transmission & Power Meter.
b. Calculated as the percent of visible light passing through the glass.
c. Calibrated at 100% Light Source.

SOLAR TRANSMISSION
a. EDTM model number SP2065 Digital Solar Meter Power/Transmission.
b. Calculated as the percent of Solar Transmission.
c. Calibrated 100% Infrared Lamp.

SHADING COEFFICIENT
Shading Coefficient of any glass is defined as the ratio of the Solar Heat Gain of the glass to the Solar Heat Gain of 1/8" (3.0mm).

« Return to Sumiglass Series